MA Tools

MArkers Help

Contents

• System Requirements
• Import Dialog
• Timecode
• Timecode Pool
• Timecode Global Offset
• Tracks
• Sequence Names / Appearances
• Sequence Pool
• Track Offset
• Sequence Start Cue
• Timecode Key
• Off Delay
• Import Settings
• Placeholder Sequence
• Special Characters
• Combine Color Markers
• Apply Colours
• TC Slot Offset
• Import Tempo Sequence
• Tempo Variable In Cue CMD
• Cue Notes
• Create Regions From Selected
• Use Reaper Marker Numbers As Cue Numbers
• Full MArkers Settings
• IP Settings (PRO)
• IP Address
• Port
• Station Select
• Start/Stop ArtNet Timecode
• Timings
• Latency Offset
• Import Defaults
• Default Apply Colours
• Default Combine Color Markers
• Default TC Slot Offset
• Default Special Character Inputs
• Default Tempo Variable In Cue CMD
• Cue Note Settings
• Default Assign Sequences To Page
• Default Reaper Markers As Cues
• Sequence Settings
• Master Sequence
• Master Sequence Name
• Master Sequence Start
• Master Sequence Start Cue
• Master Sequence Token
• Master Sequence Priority
• Master Sequence Template
• Master Sequence Fade Timings
• Master Sequence Color
• Master Sequence Exec Config
• Master Sequence Timecode Token As Exec Key
• Other Sequences
• Temp / Flash Off Delay
• MArkers Sequences
• Tempo Sequence Start
• Assignments
• Executors
• Master Sequence Assignment
• Other Sequences Assignment
• Import / Export Settings

---

System Requirements

Once Registered, MArkers works from Console, OnPC and OnMac MA3 software.

MArkers requires a USB stick to be used as a license key. Each purchase allows for 2 separate USB sticks to be registered as a key.

The current version of MArkers is V2.0.8.0. This version will not run on MA3 lower than V1.9.2.2 . Download the latest version here

Reaper Version 7 or above is required for MArkers and MArkersPRO.

---

Import Dialog

Here is an example of the import dialog that you will see when importing a Reaper project with MArkers.

---

Timecode

Timecode Pool

Here is where you specify which Timecode pool number you wish MArkers to create. If you specify an existing timecode pool object, MArkers will attempt to update that timecode with the new data being imported.

---

Timecode Global Offset

Adjust the overall offset in frames of the timecode which is imported. You may want to adjust this to adjust for any latency in your control system. For more information, and to set the default value of this field, see Latency Offset Setting

---

Tracks

Sequence Names / Appearances

When importing, MArkers will attempt to name each sequence based on your settings, see Sequence Names below. If all markers in your Reaper project are named the same, or just the first marker of a color is named, MArkers will use this to label the sequence, making the assumption that this will be a flash/temp style of sequence.

You can rename or change the color appearance of the sequences from the import GUI by tapping on the name of the sequence.

---

Sequence Pool

This is where you can specify which sequence each track will import to.

---

Track Offset

You can adjust each track's individual offset from here, with the total offset displayed to the right. For example this can be used if you have tungsten fixtures, which would naturally have a slower dimmer curve than an LED fixture, so you might want to account for this and adjust this track earlier in the timecode by typing a negative number of frames.

---

Sequence Start Cue

You can specify for each track which cue number MArkers will start storing from using this setting.

---

Timecode Key

This is the default timecode token that will be assigned when importing this track. Setting this to "Temp" or "Flash" will make MArkers add an Off Cue event in your timecode track after the cue, making a flash style event. If you assign "Top", then the imported track will only create a 1 cue sequence with "Top" as the timecode token. This method can be an effective way of creating flash/bump sequences.

---

Off Delay

When your track timecode key is set to "Temp" or "Flash", Off Delay will be enabled to allow you to set a delay in seconds before an off cue timecode event is added.

---

Import Settings

You can get to the import settings by clicking on the cog icon in the title bar of the import GUI. The settings in this GUI are Reaper Project specific.

---

Placeholder Sequence

You can renumber the sequences that MArkers has assigned and create a blank labelling sequence by inputting a new start sequence number in this input box and clicking renumber and create placeholder sequence.

---

Special Characters

These settings relate to the use of special character in a Reaper marker. You can disable any of the options in case you are using the special characters in your cue labelling.

Brackets are used to specify the cue number for that marker. For example a marker labelled "My Cue (100)" would be labelled "My Cue" and would be cue number 100.

Carets are used to specify a sequence label. For example labelling the first marker of a color "My Cue ^My Sequence^" would label the imported sequence "My Sequence".

Braces are used to add a cue CMD for the associated cue. For example labelling a marker "My Cue {Call Macro 1}" would add a cue CMD as "Call Macro 1".

Square brackets can be used to specify which timecode token should be used for that marker. For example "My Cue [Temp]" would create a timecode element with a "Temp" token assigned to it.

Greater than and less than symbols can be used to encase cue fade information. For example "My Cue <5>" would result in "My Cue" having a Cue Fade of 5 seconds. Another example could be "My Cue <4/3>" would create the cue "My Cue" with an In Fade of 4 seconds and an Out Fade of 3 seconds.

---

Combine Coloured Markers

When checked, combine colored markers will ignore that there are different colored markers in your Reaper project and combine all of the markers into one single sequence.

---

Apply Colors

Apply Colors allows the user to determine if they want to apply appearances based on the color of the Reaper marker color in the project file.

---

TC Slot Offset

Use this setting to set your Timecode pool's TC Slot Offset to the same as your Reaper's Project Start Time. For example; If set to "Yes" An event at 01:00:01.00 in a Reaper project with Project Start Time of 01:00:00.00 will be at 00:00:01.00 in your timecode pool with the TC Slot Offset at 01:00:00.00. If set to "No". An event at 01:00:01.00 in a Reaper project with Project Start Time of 01:00:00.00 will be at 01:00:01.00 in your timecode pool with the TC Slot Offset at 00:00:00.00.

---

Import Tempo Sequence

When checked, MArkers will import a tempo sequence and add this to the created timecode. This tempo sequence is used for tracking tempo changes and is used in combination with BPMTimes or custom user tempo functions.

---

Tempo Variable In Cue Command

You can set a user variable with the song tempo in the cue CMD with this setting. This can be useful if you make further use of the BPM of a track when programming. For example you if the you have our plugin BPMTimes, this variable will set the BPM value used in this plugin. Songs with tempo changes will have cue commands in associated cues where the BPM changes.

---

Cue Notes

With these settings, MArkers can add cue notes with the track tempo and/or marker timecode point. Tempo notes will only be added if the tempo of the cue has changed from the previous tempo value.

---

Create Regions From Selected

When this checkbox is selected, you will see some extra checkboxes on the main MArkers import GUI. You can then select which track MArkers will create timecode regions from.

---

Use Reaper Marker Numbers As Cue Numbers

When selected, this import setting will use the Reaper marker number as cue numbers.

---

Full MArkers Settings

---

Timings

Latency Offset

This setting allows the user to offset the imported timecode + or - a specified amount of frames to account for latency in individual systems. For example, if the delay added by cable length or external processing is 4 frames, you can write "-4" here to account for this delay.

---

Import Defaults

Default Apply Colours

This is the default behaviour for the import setting "Apply Colors". See Apply Colors

---

Default Combine Color Markers

This is the default behaviour for the import setting "Combine colored markers into a single sequence". See Combine Coloured Markers

---

Default TC Slot Offset

This is the default behaviour for using TC Slot offset. See TC Slot Offset.

---

Default Special Character Inputs

These set the default action for the Import Settings of special characters. See Special Characters.

---

Default Tempo Variable In Cue CMD

This is the default behaviour for this import setting. See Tempo Variable In Cue CMD.

---

Cue Note Settings

This is the default behaviour for the cue note settings. See Cue Notes.

---

Default Assign Sequences To Page

This is the default behaviour for the import dialog checkbox "Assign Sequences To Page". When selected, the sequences will be assigned to the page specified.

---

Default Use Reaper Marker Numbers As Cue Numbers

Default import beahavious for the setting to the Reaper marker number as cue numbers. See Reaper Marker As Cue Numbers.

---

Sequence Settings

Master Sequence

Master Sequence Name

When importing the master sequence, you can define the naming convention using this setting. There are some special cases which you can use to suit your requirements.

"ProjectName" will use the Reaper project name in the sequence label.

"ProjectNameShort" will use the initials of the Reaper project. For example, if your project is called "My Reaper Project" this will be abbreviated to "MRP".

"SeqName" will use the name generated for the sequence.

An example use of this setting could be to type the format "ProjectNameShort - MAIN", with the Reaper project labelled "My Reaper Project", the imported sequence would be labelled "MRP - MAIN".

---

Master Sequence Start

When importing a new master sequence with MArkers, this is the sequence pool number that MArkers will store from. This setting will help you to keep your sequences organised when importing.

---

Master Sequence Start Cue

When importing, if no cue numbers are defined using special characters (), this is the starting cue number the master sequence will create cues from.

---

Master Sequence Token

This is the timecode token which will be assigned as default to the timecode events to your master sequence.

---

Master Sequence Priority

This is the sequence priority for your master sequence.

---

Master Sequence Template

When set to another sequence, this sequence will be copied as your template before MArkers creates cues. For example you might have a template sequence you want to use every time you use MArkers which has Cue 0.5 and Cue 100 already stored with a "house" look. When MArkers imports, it will copy this sequence, then add the Reaper markers as cues as your master sequence.

---

Master Sequence Fade Timings

The Fade Unit setting has the options of "Beat" and "Seconds". "Beat" will use the tempo from your Reaper project to calculate the amount of beats using the "Fade Time" input to use as the default Cue Fade. "Seconds" will use the "Fade Time" input and assign this number in seconds as your default Cue Fade.

---

Master Sequence Color

When importing a project from Reaper, by default, MArkers will use Reaper's default (red) marker colour to import as the master sequence. In some cases, you might want to use a different colored marker to import as your master sequence. You can change the marker color with this setting. Note, the list of colors available are collected from previous imports. If the color marker you need isn't shown, then first sync your project to add the marker color to this list.

---

Master Sequence Exec Config

When MArkers creates sequences and assigns them to an executor, you can specify an existing executor configuration.

---

Master Sequence Use Timecode Token As Exec Key

Setting this setting to "Yes" will assign the timecode token to the executor key. For example, if your timecode token for a track is "Top" then when importing your project, MArkers will assign a "Top" to the executor key. If this setting is set to "No" then MArkers will ignore the timecode token as instead the default token for the user.

---

Other Sequences

For most of these settings please refer to Master Sequence Settings.

---

Temp / Flash Off Delay

This is the default delay time for Temp or Flash events when importing these tracks.

---

MArkers Sequences

Tempo Sequence Start

MArkers creates a tempo sequence, which tracks tempo changes throughout your Reaper project. This setting will define which sequence pool number your tempo sequences will store from.

---

Assignments

Executors

Master Sequence Assignment

When importing, MArkers can assign your sequences to executors on a given page. This setting sets the default assignment of executors for your sequences. For example, "201 Thru 290" will assign sequences sequentially from 201 to 290. You can also use cases such as "101 Thru 105, 201 Thru 205, 301 Thru 305, 401 Thru 405", using a comma between each range will allow MArkers to know you want to use multiple ranges of executors.

---

Other Sequences Assignments

The same as Master Sequence, but for other sequences that MArkers imports.

---

Import / Export Settings

In the title bar of MArkers settings, there's an Import/Export button which will allow you to Export your settings to a file in your USB drive. We highly recommend doing this so you can import them if your settings get lost or if you're starting on a new showfile. To recall your settings, simply click the Import Settings button and select the previously exported settings from the list.

---

---

MArkers Macros

---